RAID Data Recovery Guide and Tips
If your RAID drive has crashed, a suitable method of recovering data from the disk must be chosen. Usually, RAID configurations are designed to maintain the equilibrium between the device’s power and output.
Tools for data recovery raid
1. Analyze the Cituation
Next, you need to analyze the situation and look at the RAID’s configurations. Make sure that you try to find out which part of your data is unavailable in this process. Check also the RAID module. You can also use Drive Monitor to monitor the RAID’s troubled disks.
2. Go through the Factory Manual
In order to recover data from a faulty RAID drive, make sure you read the factory manual as well. This will help you get a better idea of the technical aspects of the card and the information you need for the card-configuration.
3. Check the Backup
Find out if you are able to access the backup of the lost files. You may want to contact a RAID data recovery service if there is no backup available. You don’t want to write any more data on the drive in the meantime.
4. Test the motherboard and the Raid Card
The RAID drives are sometimes perfect and the problem is somewhere else. The issue may be the RAID card or the motherboard, for example. You should submit the machines to replace the manufacturers for verification. On the other hand, if the drivers can be identified by the RAID card, the RAID configuration is likely to be perfect.
5. Do not try a reconstruction process
If the drivers are not read by the RAID, you can need the reconstruction process. Chances are, however, that the attempt will not be successful. It is better to avoid making any attempt at configuration that could cause additional damage. Make sure that the backup on the same disk is not restored.
6. Do not mess with the configuration of the raid
7. Contact an Expert
While you can use a good data recovery software to get your data back, for a number of reasons it is not recommended. You can be confident that your data is not lost or left out by contacting experts.
If you have RAID drivers, make sure that you periodically track the drives. You can keep track of how each drive performs with data maintenance and if any of them is defective. Often, making a backup of your data is a must to be on the safe side.
So, you can ensure safe data recovery if you follow the tips given above. If in doubt, getting in touch with a specialist is always a great idea. They’ll help you get your data back in a couple of days.
